Manual for CAME ZL92 Control Board Includes ZL92, V21EN. Press the Right Mouse Button / Control-Click and Select “Save Target / Link As” to Download. The ZL19N control panel is engineered and built by Came Cancelli Automatici S.p.A. to Came Cancelli Automatici employs an ISO certified quality. In this condition I went a great while, but when comforting time was come, I heard .}Zl. Acts | my love, thou art my love; and nothing shall separate. Gl.
|Published (Last):||21 March 2005|
|PDF File Size:||8.11 Mb|
|ePub File Size:||7.32 Mb|
|Price:||Free* [*Free Regsitration Required]|
To start programming, place the jumper across both pins.
Channel setting for the left button is made by linking columns 1 or 2. Programmable receivers treat the channel code as an extension of the site code.
The sixth column of a two channel transmitter is for programming. Two channel transmitters have 6 pairs of gold pins arranged in 6 columns. Receiver channels The outputs on the single and dual channel receivers can be selected by jumper link to respond to any of the four transmit channels. The transmitter code needs to have been written down safely at the commissioning stage. Its link is stored on one pin only. Remote control handset and keyfob transmitters for electric garage door and gate operators by mail order Secure On-Line Shopping and Same-Day despatch Items in Basket: The four channel receiver has a separate output for each channel.
Our online shop is powered by. Click image to enlarge CAME ref: Coding TOP transmitters send a 12 bit code made up from a 10 bit site code plus a 2 bit channel code. It is not possible to read the code from a programmable decoder.
All other trademarks are the property of their respective owners. We also accept payments via PayPal.
Transmitters are supplied with a CAME default code  so that the system can be commissioned. This gives combinations.
Remove the programming link immediately and store. Four channel transmitters only have the programming jumper column.
It is recommended you set a random site code for new installations. The transmitter beeps each press of a button, and twice at the end of the sequence of ten presses.
If the transmitter has a red light and a green belt clip, it is a BIM type that is not compatible with the TOP series. You will need to read the site code from the cam DIP switches and make a note of the sequence. If the transmitter you have has buttons down the side and has a green light, they are older models but still compatible.
Two button transmitters are supplied programmed to CH1 left button and CH2 right button. Receiver coding On old model receivers, the ten bit site code is set on a DIP switch at the top of the receiver board.
Check the receiver is compatible before attempting to programme either. The transmitters have an internal bleeper that has to sound four times before the full code is sent. Columns are numbered from right to left. Remote control handset and keyfob transmitters camd electric garage door and gate operators by mail order. Each receiver has a 10 bit DIP switch to set the site code, which is common to all the channels.
CAME – TOP series transmitter coding instructions
Transmitter buttons The TM and TM are two button transmitters whose transmit channels can be selected by programming jumpers. Compatibility The transmitter button colour determines the frequency.
Open the battery compartment and hold with the battery towards you.