Metrohm’s CIC does it: ASTM D Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their. Significance and use according to ASTM D – 14a. ASTM D – Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic.
|Published (Last):||12 June 2007|
|PDF File Size:||8.57 Mb|
|ePub File Size:||8.20 Mb|
|Price:||Free* [*Free Regsitration Required]|
If bubbles are present in the liquid column,? Calculate the actual concentration of the stock standard solution s for each element by using the equation below with the actual recorded weight of the target compound used for each element. Use materials that are rated for containing these hydrocarbons in all sample containers and sample transfer apparatus. This test method can be used to determine total sulfur and halogens aromatic hydrocarbon matrices, in? Post Analysis Steps NOTE 6—It is recommended to calibrate the instrument d359 a minimum of three different concentration standards.
In CIC the samples 7d359 first digested under an argon atmosphere in the oven unit and then burnt with oxygen.
The autosampler may be used as long as the accuracy and performance of the method is not degraded. In contact with the skin it produces burns that may be quite serious unless promptly treated. The calibration curve should be at least 0. The pyrohydrolytic combustion tube must be of ample volume, and have a heated zone with quartz wool or other suitable medium providing sufficient surface area so that the complete pyrohydrolytic combustion of the sample is ensured.
However, it is the responsibility of the analyst to verify the solubility of the sample in the solvent and that the diluted sample results conform to the precision and accuracy of the method. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
Metrohm Australia – Metrohm New Zealand. This test method can be used to determine total sulfur and halogens in aromatic hydrocarbons and their mixtures.
Delivery of hydronium ions for suppression by electrolysis of recycled eluent through a cation exchange membrane. Mr Mrs Ms Dr Prof. L of standard or sample. This stock standard solution can be aztm diluted to other desired concentrations.
ASTM D — 14a: The sample may also be weighed directly into a sample boat and placed into the boat drive system. L or 80 mg can be quantitatively absorbed before injecting the absorbing solution into the IC by analyzing multiple injections of sample, combusting each individually and effectively concentrating the elements of interest in the absorbing solution prior to injection into the Ion Chromatograph. Unless otherwise indicated, it is intended that all reagents shall conform to the speci?
ASTM D7359-08 Standard Test by Combustion Ion Chromatography-CIC
S with a linearity correlation coefficient of 0. No other units of measurement are included in this standard.
The difference between the two volume readings is the volume of sample injected. In the Absorber Module, the resulting gaseous compounds are passed into an absorption solution, which is then transferred inline to a Metrohm ion chromatography system, where it is analysed. Standards Subsctiption may be the perfect solution. If the document is revised or amended, you will be notified by email. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the risk of infringement of such rights, are entirely their own responsibility.
The total fluorine, chlorine and sulfur contained in aromatic hydrocarbon matrices can contribute to emissions, be harmful to many catalytic chemical processes, and lead to corrosion.
ASTM D – 14a : Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons
Retention times vary with operating conditions. NOTE 5—A correction for chemical impurity can be used if deemed necessary. Decrease the boat drive introduction rate or hold times in the furnace, or both, if coke or soot is observed on the exit end of the combustion tube.
Exercise extra care when using?
Metrohm: ASTM D7359 – 14a : Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons
As the voice of the U. ASTM D – No other units of measurement are included in this standard. After each standard concentration has been combusted, an aliquot of absorbing solution is asstm into the IC for separation and quanti? Work Item s – proposed revisions of this standard. The results can be used for compliance determinations when acceptable to a regulatory authority using performance based criteria.
This is a temporary precision statement and reproducibility will be determined within? Summary of Test Method 3.